You are here: Home » News » Product News » What is Cable Tray Roll Forming Machine?

What is Cable Tray Roll Forming Machine?

Views:988     Author:Site Editor     Publish Time: 2017-06-15      Origin:Site

The Cable Tray Roll Forming Line Produced by us, is used for producing cable trays that are used in different kind of factories and buildings. We offering you to Cable Tray Machine that comprise of efficient Punching Press, Hydraulic Press, Electric Control panel and many other Equipment, which make it an ideal option for many. The Cable Tray Roll Forming Machine can Manufacturing a both superiority and quantity cable trays in less time.

  • De coiler 2 ton cap.

  • Entry Gate with

  • Roll Forming Line with 9 station, 1 Gear Boxes & 3H.P.      electrical.

  • Control Panel semi auto

  • Cutting Unit

Technical Specifications : (Plate body)

  • Maximum sheet width that can be formed : 600 mm

  • Maximum sheet thickness in G I Strips that can be formed : 1      mm

  • Vertical distance between shafts : 100 mm

  • Horizontal distance between shafts : 190 mm

  • Number of forming stations : 9 nos.

  • Vertical station : 7 nos.

  • Total HP for Line : 3(ABB)

  • Speed of the machine : 4mt/minute

  • Size of machine : 1600 x 800 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 2 MT Max

  • Coil width : 600 MM

  • Coil bore : 450 MM min, 510 MM max dia.

  • Mandrel movement : Manually adjusted

  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.


CONTACT US
ADD:Daxin Town, Zhangjiagang City, 
south of New Road
TEL:+86-512-58376558
FAX:+0512-58376989
LEAVE A MESSAGE
If you have a suggesstion for our Products,
please leave us a message

 ©2016   ZhangYun Machinery Manufacturing Co.,Ltd.All Rights Reserved. Site map  Link:Alibaba    Designed by wonder-tech