Classification of photovoltaic bracket and application of solar photovoltaic bracket machine

Classification of photovoltaic bracket and application of solar photovoltaic bracket machine

There are a variety of specifications and models of photovoltaic materials produced by photovoltaic bracket forming machine, among which the size changes the most, so there are great differences in equipment manufacturing. As an important part of photovoltaic power generation, it carries the main power generation of photovoltaic power station, so the selection of scaffold materials directly affects the safety and operation effect of the project. Good photovoltaic scaffold materials can reduce the maintenance cost in the later period and indirectly reduce the project cost.

1. Classification from production materials. In order to better control the cost, it is necessary to understand the classification of materials produced by the photovoltaic bracket forming machine. Application, often according to the material force situation reasonable selection, such as aluminum alloy bracket, steel bracket and non-metal bracket, the market is more used for Q235 steel bracket. Through the rolling forming process, the PV bracket machine directly cold-bending the material to the required bracket material. The finished product size specifications are 41*21, 41*41, 41*51, 41*51 and other requirements.

2. The installation mode is classified. This classification method is mainly based on the materials produced by the photovoltaic bracket machine to flexibly install the bracket according to the change of the solar incidence Angle. It mainly includes three bevel Angle installation methods: the optimal Angle fixed type, the adjustable Angle fixed type and the inclined roof fixed type, each of which has advantages and disadvantages: (1) The optimal inclination is fixed, the inclination with the maximum radiation amount is fixed to achieve the maximum annual cumulative radiation amount, which is widely used in roof power stations and ground power stations; (2) Angle adjustable fixed, is through regular adjustment of the tilt Angle, such as push and pull bar type, arc type, jack type and hydraulic method, to achieve the purpose of adjusting the Angle, in order to improve the quarterly radiation energy; (3) The fixed type of inclined roof is fixed with the inclination of inclined roof, which is mainly used in the roof roof, so there is a certain loss of energy radiation.

Solar photovoltaic support molding equipment is a plastic processing technology of specific section profiles by means of sequential configuration of multi-pass forming rolls, which continuously bend the coils, vegetables and other metal plate belts horizontally. Can handle 0.2mm - 12 mm thick sheet metal; The dimensional accuracy of the profiles produced can be controlled within 0.2 mm. Photovoltaic bracket cold bending equipment is a kind of material saving, energy saving metal sheet forming new process, new technology. Using this technology, not only can produce high quality section steel products, but also can shorten the product development cycle, improve production efficiency, so as to improve the market competitiveness of enterprises.