Structural characteristics of C-shaped steel forming machine

Structural characteristics of C-shaped steel forming machine

C-shaped steel machine is also called C-shaped steel sandalwood machine, is one of the many varieties of tile press, is a basic type of tile press. Before we use c-shaped steel forming machine, we need to understand the structure characteristics of this equipment as much as possible. So what are the structural features?

C-shaped steel machine is mainly composed of passive loading frame, leveling device, punching device, cutting device after forming, hydraulic station, computer control system, etc. This machine adopts automatic flying saw punching, easy to operate and so on. The main products can be used as the main force structure of large and medium-sized industrial and civil buildings. Different from the color steel plate forming machine, it is hydraulic power, and the power is very large, generally about 22KW, similar to the plate bending machine, the general control process is complex, and the use of PLC control. C-section steel machine rolling products have good tensile bending and pressing performance good flatness, automatic fixed-length cutting, automatic punching, high automation level, convenient device.

Material: using steel plate as the base material (tensile strength 5600KG/CM) plus design and rolling molding, with structural characteristics: color composite sandwich board surface material and thermal insulation material is non-combustible material, can meet the requirements of the specification.

Installation: the composite board has the characteristics of light weight, splicing installation and can be cut intentionally, which determines the simplicity, convenience, benefit, saving and time of installation

Durability: a variety of display, and more than 40 years of extensive use of color plate coating processing shelf life in 10-15 years, after every 10 years of spraying paint, plate mai life can reach more than 35 years.

Beautiful: the clear lines of the profiled-steel plate are as many as dozens of colors, which can meet the needs of any style of buildings to achieve satisfactory results.

C-beam machine roll of C steel finished product has a good stretch bending pressure performance straightness is good, completely automatic fixed-length cutting, automatic punching, high degree of automation, easy installation, the product can be used as the main body of large and medium-sized industrial and civil construction mechanical structure, such as factories, warehouses, engine garages, hangar, exhibition halls, theaters, sports venues, bazaar, mounted flat roofing load-bearing load and wall support.

The C-section machine equipment simplifies the production process and the wall thickness can be made very thin. Improve production efficiency. It can produce all kinds of profiles with uniform wall thickness but complex section shape and different materials which are difficult to be produced by general hot rolling method.

No matter for what style of cold bending machine, in the process of operation is very smooth, but also can bring us reliable quality. In the view of vertical C-shaped steel forming machine manufacturers, its noise is relatively low, can bring us a long service life. Our staff in the process of installation and maintenance will also be very convenient, it can bring us a lot of different cold bending effect, in a wide range of uses.

The use of different materials, C-shaped steel molding machine manufacturers think that the consequences are not the same, in the process of operating equipment, the staff must remember to choose the more appropriate spiral belt structure, some materials may need to be heated, and some materials need to be dried. These are the problems we should pay attention to.

In addition, different models of products in the structure of the characteristics of the performance is not the same, so the choice of good equipment, more appropriate equipment is particularly important.