Installation of elevator guide rail production.

Elevators and escalators can be seen in many places. Such as shopping malls, office buildings, residential quarters, etc. But many people don't know elevator guide rail production. In this article, I will introduce some knowledge about elevator guide rail production, I hope it can help you.

l Installation of elevator guide rail production.

l Our company has the elevator guide rail production.

Installation of elevator guide rail production.

GB10060-93 <Elevator Installation and Acceptance Specification> Technical requirements for the installation of elevator guide rail production:

1. Each guide rail has at least two guide rail brackets with a spacing between 2-2.5M [3]. In special circumstances, measures should be taken to ensure that the production and installation of elevator guide rail production meet the bending strength requirements specified in GB7588-2003. The level of the elevator guide rail production bracket is not more than 1.5%, and the anchor bolts or brackets of the guide rail bracket should be directly embedded in the depth not less than 120mm. If the welding bracket is used, the welding seam must be continuous and should be welded on both sides.

2. When the elevator rushes to the top, the guide shoe should not go off the track.

3. The deviation of each elevator guide rail production work facing the installation baseline of every 5M should not be greater than the following values: the counterweight guide rail with safety gear is 0.6mm for the car, and the T-shaped counterweight guide rail without safety gear is 1.0mm .

4. In the elevator guide rail production, the pressing plate should be fixed on the guide rail frame, and welding or direct connection should not be used.

5. The distance deviation between the top surfaces of the two rows of elevator guide rail production: +2-0 for the car; +3-0 for the counterweight guide rail.

6. When there is a reference line for installation, the elevator guide rail production should be tested in a row relative to the reference line, and the maximum deviation value is taken.

Our company has the elevator guide rail production.

Our company (Zhang Yun Machinery) specializes in manufacturing advanced multi-material, multi-thickness, multi-shape cold bending equipment, high-frequency welded pipe equipment, special equipment for auxiliary processing of elevator guide rail production, and non-standard automated production lines. Our high-performance roll forming system can process a large number of different types of high-quality profiles. Among the products related to elevator guide rail production, there are: semi-automatic twisting machine, automatic metal processing production line, derusting machine, coating machine, manual straightening machine, planer, oiling machine, etc.

If you are satisfied with the products produced by our company's (Zhang Yun Machinery) elevator guide rail production, you can go to our company to check the products produced by elevator guide rail production, or you can also order products. Our company specializes in manufacturing cold-formed equipment, high-frequency welded pipe equipment, elevator guide rail production auxiliary processing equipment and a solid pioneer in the field of non-standard automated production lines, providing users with flexible solutions that combine more advanced design concepts and laboratory instruments Detection Systems. Looking forward to your visit, I wish you success in your work.