Effective bundle protection and lubrication process for cold formed steel equipment

 Effective bundle protection and lubrication process for cold formed steel equipment

Effective tube bundles should be used to protect the upper and lower rollers or horizontal wheels of cold-formed steel equipment, otherwise problems are likely to occur during use. For example, slides will have blurred or deformed tracks and will also be subjected to uneven stress, which will shorten their service life. In the production process, if bending and twisting occur, the main cause is force imbalance, so the force must be balanced in the design so that it can be machined accurately.

Rolling stability must be considered in the process of cold rolling equipment. If the material is deflected left or right in the raceway, we must take appropriate measures. For example, the gaps between rollers can be kept consistent during assembly. The guide bevel can be set up before the material bites to avoid this problem.

In cold bending equipment, friction between the surface scratch on the roller surface and the strip due to heating must be formed during the forming process of lubrication and cooling during cold bending. Roller and roll forming lubricants are usually divided into non-water lubricants and water-soluble lubricants.

Widely used are water-soluble emulsions, which are adhesive to oil film thickness, as well as good lubricity and rust resistance. However, care should be taken to prevent the decomposition of lubricants remaining on the profile surface due to local corrosion during storage. Although the lubrication performance of soluble organic lubricants is slightly worse, due to the action of surfactants, its shape and equipment are less polluted, which can maintain a clean production environment.

For cold-formed steel equipment, although the relevant content has been mentioned above, it still does not meet the expected goals and requirements in terms of the degree of achievement. So, next, we'll continue this work for everyone, as you gain further knowledge and understanding while also increasing your knowledge in the field.

1. Which is larger in cold-formed steel equipment and color steel equipment?

If the scope of cold-formed steel equipment and color steel equipment is compared, the scope of cold-formed steel equipment is much larger. Among them, not only is the color steel equipment, there are some other equipment. Therefore, there is a subordinate relationship between them, that is, color steel equipment belongs to cold formed steel equipment.

2. What are the advantages of C-shaped steel machine in cold-formed steel equipment?

The C-shaped steel machine in cold-formed steel equipment is mainly used for manufacturing C-shaped steel, that is, C-shaped steel in cold-formed steel. The raw material is mainly steel plate or strip. Its advantage is: can simplify the production process, improve the production efficiency. Also, a variety of shapes and sizes are available.

3. Does i-steel cold bending machine belong to cold bending equipment? What should be paid attention to when using cold bending machine?

I-steel cold bending machine belongs to cold bending steel equipment, so on question 1, the answer is yes, there is no doubt about it. I-beam cold bending machine belongs to cold bending machine. Therefore, cold bending machine also belongs to cold bending steel equipment.

There are two precautions when using a cold bending machine. One is to adjust its fixed pressure, which can be done by the distance between the roller and the upper wheel in the machine. In order to avoid material deformation, it will affect the cold bending effect of cold bending machine.